How to Solve Prepaid Electricity Meter Appears Writing “dylEbih”

The rainy season is often accompanied by lightning, which can cause disruptions in your home’s electrical installation. One common issue is the appearance of a “dyLEbih” or “d4Lebih” notification on the electrical meter, indicating an overload. This condition can disrupt the power supply and potentially damage electronic devices.

Understanding the causes of electrical overload and how to deal with it is essential to prevent further damage and to ensure your home’s electrical system remains safe. This article provides an in-depth look at electrical overload and the best solutions to resolve it.

What is Electrical Overload on the Meter?

Electrical overload occurs when your electricity usage exceeds the power capacity provided by the utility company (PLN) based on the installed capacity in your home. When this happens, the meter detects an excess load, which may cause a temporary power outage or an error notification like “dyLEbih” or “d4Lebih”.

Causes of the “dyLEbih” Notification on Electrical Meters

The notification on your digital meter can be triggered by several factors, including:

1. Voltage Surge from Lightning

When lightning strikes the power grid or your home, it can cause a sudden spike in voltage. This surge may cause your meter to detect a load that exceeds the limit, triggering an overload warning.

2. Exceeding Power Capacity

Each household has a specific power capacity set by PLN, such as 900 VA, 1,300 VA, or 2,200 VA. If too many electrical devices are used simultaneously, the total power consumption can surpass this limit, prompting an overload alert on the meter.

3. Substandard Electrical Installation

Low-quality cables or improper wiring can lead to imbalanced electrical currents, which may trigger an error in the digital meter. Improper installation also increases the risk of short circuits and electrical fires.

How to Resolve Electrical Overload on the Meter

To fix the overload issue indicated on your meter, try the following steps:

1. Check Your Home’s Electrical Load

Ensure you are not using too many high-powered devices at once. Some appliances that consume a lot of electricity include:

• Air conditioners (AC)
• Washing machines
• Electric water heaters
• Irons
• Electric ovens

If the “dyLEbih” notification appears, unplug some of these appliances to reduce the electrical load. Then, wait about 40–45 seconds until the LED indicator on the meter returns to normal. Afterward, switch the MCB (Miniature Circuit Breaker) back to the ON position.

2. Perform a Meter Reset

Digital meters are typically equipped with automatic recovery after detecting an overload. However, you can also reset it manually by following these steps:

1. Turn off all electrical devices in the house.
2. Press the “Enter” or “Reset” button on the meter.
3. Wait a few moments for the meter to return to normal.
4. Turn on your appliances gradually to prevent sudden power surges.

3. Use Electrical Protection Devices

To prevent voltage spikes from lightning, consider installing:

• Surge Protectors: These stabilize voltage levels and protect electronic devices from sudden spikes.
• Stabilizers: These maintain consistent voltage and prevent damage to home appliances.

4. Inspect the Electrical Installation

If overload issues occur frequently, it could indicate a problem with your home’s electrical system. Call a licensed electrician to inspect the installation and ensure you're using high-quality electrical cables such as those from Wilson Cables, designed for safe and long-lasting use.

How to Prevent Overload from Recurring

To avoid future overload issues, consider the following preventive measures:

1. Use High-Quality Electrical Cables

Proper installations require high-quality cables that can withstand voltage surges and high electrical loads. Wilson Cables offers a wide selection of cables that meet strict safety standards to ensure a secure power supply for your home.

2. Install a Lightning Rod

A lightning rod can help minimize the risk of voltage surges caused by direct lightning strikes to your home or the nearby power lines.

3. Upgrade Your Home’s Power Capacity

If you frequently experience overloads, consider upgrading your power capacity to meet your household’s energy needs and avoid exceeding the limit.

4. Use Electrical Devices Efficiently

Avoid using multiple high-powered devices simultaneously to reduce the likelihood of triggering an overload message on the meter.

Conclusion

Electrical overload can be caused by voltage surges from lightning, excessive power consumption, or substandard wiring. To resolve it, reduce your electrical load, reset the meter, use surge protection devices, and ensure the installation meets safety standards.

To keep your electrical system safe and durable, always use high-quality electrical cables like those from Wilson Cables. With the right cables, you can minimize electrical disruptions and enhance the safety of your home.